Pass-through cleaning equipment
概述（Summarize）：
JGR-QX全自动履带式超声波清洗线适用于去除零部件内外面附着的油污、灰尘等杂质。该设备有1个喷淋清洗室、1个超声波清洗室、1个喷淋漂洗防锈室、1个压缩空气切水室、1个热风烘干室，共5个工位。其工作原理是人工将欲清洗工件放置不锈钢履带上，然后按照一定的工艺程序清洗、烘干后卸料。设备外形美观，结构合理，使用寿命长，是理想的金属件清洗设备。
JGR-QX full-automatic crawler ultrasonic cleaning line is suitable for removing oil stains, dust and other impurities attached inside and outside parts. The equipment has a spray cleaning chamber, an ultrasonic cleaning chamber, a spray rinsing antirust chamber, a compressed air water cutting chamber and a hot air drying chamber, with a total of 5 stations. The working principle is to manually place the workpiece to be cleaned on the stainless steel crawler, then clean and dry the workpiece according to a certain technological procedure, and then discharge the workpiece. The equipment has beautiful appearance, reasonable structure and long service life. It is an ideal cleaning equipment for metal parts.
设备具有如下特点（The equipment has the following characteristics）：
清洗工件自动传送；
Automatic Transfer of Cleaning Workpieces；
超声振子上下两面辐射；
The upper and lower surfaces of the ultrasonic vibrator radiate；
喷淋漂洗能除去工件上残留清洗液，减少二次污染；
Spray rinsing can remove the residual cleaning liquid on the workpiece and reduce secondary pollution；
增设储液箱、清洗液循环过滤系统，保证清洁度；
A liquid storage tank and a cleaning liquid circulation filtering system are additionally arranged to ensure cleanliness；
专用不锈钢网带采用特殊工艺制成，使设备运行安全可靠；
Special stainless steel mesh belt is made of special technology, which makes the equipment safe and reliable；
根据工件清洁度要求，任意调节清洗时间；
According to the requirements of workpiece cleanliness, the cleaning time can be adjusted arbitrarily；
电气部分及控制箱与整机分体安装与操作方便；
The electrical part, control box and the whole machine are separately installed and operated conveniently；
上部防尘盖使设备完整美观。
The upper dust cover makes the equipment complete and beautiful.
设备主要构成（Main components of equipment）：
上、下料台：1套（设备主线两端）
Upper and lower feeding tables: 1 set (both ends of main line of equipment)
退磁系统：1套（用户自备）
Demagnetization system: 1 set (user-provided)
喷淋清洗系统：1套
Spray cleaning system: 1 set
超声波清洗系统：1套
Ultrasonic cleaning system: 1 set
喷淋漂洗防锈系统：1套
Spray rinsing antirust system: 1 set
压缩空气切水系统：1套
Compressed air water cutting system: 1 set
热风烘干系统：1套
Hot air drying system: 1 set
支架：1套
Bracket: 1 set
不锈钢履带：1套
Stainless steel track: 1 set
外封：1套
External seal: 1 set
电控系统：1套
Electric control system: 1 set
主要工艺流程（Main process flow）：
清洗流程：手工上料→退磁→喷淋清洗（喷淋泵+电加热温控）→超声波清洗（超声波+电加热温控）→喷淋漂洗防锈（喷淋泵+电加热温控）→压缩空气切水→热风烘干（风机+空气加热）→手工下料
Cleaning process: manual feeding → demagnetization → spray cleaning (spray pump+electric heating temperature control) → ultrasonic cleaning (ultrasonic+electric heating temperature control) → spray rinsing antirust (spray pump+electric heating temperature control) → compressed air water cutting → hot air drying (fan+air heating) → manual feeding
